Wireless Charging Grip – centered logo-12
available_at_amazon_rgb_en_vertical_clr_en_vertical

View User Guide

View Press Release

WCG 12

WE’RE CHANGING THE WAY YOU GAME

When placed up to a foot from your PowerSpot® RF Wireless Transmitter, the Wireless Charging Grip automatically connects and starts charging.

Bluetooth Low Energy (BLE) enables intelligent wireless charging where power is only sent as needed. The Grip requests power from the transmitter when its batteries are low, and tells it to stop when charged.

PowerSpot logo final lg-01

A NEW WAY TO MONITOR YOUR CHARGING

The new PowerSpot app lets you see all of your PowerSpot-enabled devices at once to monitor charging, complete firmware updates, pause your PowerSpot transmitter, and more.

PowerSpot app images-01
PowerSpot app images-03
PowerSpot app images-02
unnamed (2)
unnamed (3)
Images
WCG 03
WCG 02
WCG 10
WCG 04
WCG 09
WCG 06
WCG 07
WCG 11
WCG 01
WCG 13

view
Wireless Charging Grip
FAQ

HOW IT WORKS

How it works

Compliance

Wireless Charging Grip (WCG91501) Compliance Statements

Changes or modifications not expressly approved by Powercast could void the user’s authority to operate the equipment.  Use and maintain device only as specified in this manual.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions:

  • this device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

WARNING!

FCC and IC Radiation Exposure Statement:

This portable equipment with its antenna complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment.

 

PowerSpot transmitter (TX91503) Compliance Statements

Changes or modifications not expressly approved by Powercast could void the user’s authority to operate the equipment.  Use and maintain device only as specified in this manual.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

WARNING!

FCC Radiation Exposure Statement:

This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions:

  1. This equipment should be installed and operated such that a minimum separation distance of 20cm is maintained between the radiator (antenna) & user’s/nearby person’s body at all times.
  2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Radiation Exposure Statement:

This equipment complies with IC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions:

  1. This equipment should be installed and operated such that a minimum separation distance of 30cm is maintained between the radiator (antenna) & user’s/nearby person’s body at all times.
  2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IP

Powercast products and technology are covered by one or more patents and other
patents pending. View the comprehensive patent list here:    www.powercastco.com/IP

Warranty

Powercast products are sold under limited warranty. Learn more:
www. powercastco.com/terms-conditions