Tag Archive for: powercast

Frequently Asked Questions

Powercast develops wireless power and RF energy harvesting solutions to provide power-over-distance for low-power applications (low microwatts and low milliwatts). Devices that typically operate on batteries for months or years can benefit from Powercast’s patented, high-efficiency RF energy harvesting technology. The cost of wiring or battery replacement can be eliminated in low-power devices through wireless, remote trickle-charging, or devices can be made completely battery-free.

General Questions

What are the intended applications for Powercast technology?
There are numerous applications that can benefit from using Powercast’s technology. The amount of received power, the use case, antenna form factor, and charge rate must be considered. Devices that operate on a set of batteries for weeks, months, or years are candidates for Powercast’s technology. Powercast is currently focused on low-power applications such as, high function RFID, battery recharging in wearable devices, and LED lighting.

Where can I buy Powercast products?
Powercast technology is designed for Original Equipment Manufacturers (OEM’s) to embed directly into their products and systems. Products can be purchased through Future Electronics, Mouser Electronics, and Arrow Electronics. If your company is an OEM and is seeking sales support , please contact us to discuss your application in more detail.

What products does Powercast offer?
Powercast offers modules and chipsets. Our modules are the P1110 & P2110B, which are for low volume applications and provide ease of implementation. Our chipsets are the PCC110 & PCC210, which are for high volume applications. Additional information about the chipsets is available after the completion of a Reference Design Confidentiality Agreement.

Does Powercast provide custom development services?
Yes. Powercast has completed multiple custom development projects related to RF-based wireless power and RF energy harvesting. Please contact us to provide details on your project so that we may provide a quote.

Where can I get more information about the PCC110 & PCC210 chips?
Information regarding the PCC110 & PCC210 chips is available after the completion of a Reference Design Confidentiality Agreement.

Power Questions

How much power can be transmitted?
In the United States and Canada, the maximum amount of power that can be transmitted is 4 Watts EIRP. Our TX91501 transmitter broadcasts approximately 3 Watts EIRP.

How much power is received?
The received power is determined by several factors, including distance and receiving antenna performance. Available energy after conversion in the low milliwatt (mW) and microwatt (uW) range should be expected. Please see the wireless power calculator.

What is the efficiency of the power transmission?
Powercast’s technology enables unique applications for remote charging, and multiple devices can be charged simultaneously. The end-to-end efficiency of power transfer is not a relevant metric of comparison.

What is the efficiency of the RF to DC power conversion?
RF-to-DC conversion efficiency is as high as 70% in some scenarios. Please see the datasheets found on the documentation page for performance graphs.

What is the maximum distance that your transmitter will work?
The transmitter output power is limited by government regulations, so the receiving antenna is a primary factor in operating range. Antennas with higher gain provide a better range. The directional antenna provided with the evaluation boards has a gain of 6dBi and will enable a range of 40-45 feet (12-14 meters) line of sight with the P2110B component. Our P21XXCSR-EVB Chipset Reference Design Evaluation Board has newer designs that enable greater sensitivity and range.

Radio Frequency Questions

What frequencies are supported?
The P1110 and P2110B Powerharvester receivers are designed for a center frequency of 915 MHz, but have a reasonable operating range from 850-950 MHz. The P21XXCSR-EVB supports GSM-850 uplink, Europe RFID & GSM-850 downlink, ISM USA & GSM-900 uplink, GSM-1800 uplink, GSM-1900 uplink, and Wi-Fi 2.4 GHz frequency bands. Please see the datasheets found on the documentation page for performance details. The Powerharvester technology can be adapted to other frequencies and Powercast does custom development projects for frequency modification. Please contact us to discuss custom projects for frequency modification.

Can I use the P1110 or P2110B components for harvesting from WiFi?
These components are designed with a center frequency of 915 MHz and therefore, can not be used to harvest energy from Wi-Fi routers. Although these components can not be used to harvest Wi-Fi our P21XXCSR-EVB Chipset Reference Evaluation Board does support harvesting Wi-Fi 2.4 GHz.

Do you have any components for harvesting from 2.4GHz / Wi-Fi?
Currently, the P21XXCSR-EVB Chipset Reference Evaluation Board supports harvesting Wi-FI 2.4 GHz frequency. However, standard modules for harvesting 2.4 GHz are not offered at this time. Please contact us about using the PCC110 & PCC210 chips for harvesting Wi-Fi.

Antenna Questions

What type of antennas can be used?
Powerharvester receivers are designed to work with standard 50-ohm antennas. An antenna should be matched as closely as possible to the frequency being received.

Does Powercast design custom antennas?
Powercast has antenna design expertise. Please contact us to discuss customer antenna development projects.

Transmitter Questions

Can I make any adjustments to your transmitter?
There are no user controls on the existing TX91501 Powercaster transmitter. Making modifications inside of the device would be a violation of FCC and Industry Canada regulations and also void the product warranty.

Is your transmitter required for this to work?
Powercast’s transmitter products are not required to operate the Powerharvester receivers, but some source of RF energy must be provided.  Ambient energy from sources such as mobile base stations (i.e. cell sites) are typically not strong enough to operate existing Powerharvester receivers at a useful distance, but may apply in some scenarios.  Harvesting from a mobile phone is typically more viable than harvesting from a mobile base station.

Can I use your transmitter in any country?
Powercast’s TX91501 transmitters are certified for use only in the United States and Canada, other countries have different frequency requirements and power limitations. Some countries allow for demonstration or experimental use without regulatory certification.

What modulation can be used to operate the Powerharvester receivers?
The Powerharvester recievers work independent of the type of modulation use (FHSS, DSSS, etc) by a transmitter, and can receive power from one or more transmitters using any type of modulations.  The power of the signal is the primary metric for operation.

How does your transmitter send data?
The Powercast TX91501 transmitter broadcasts data as well as power. The data is currently a transmitter ID implemented using 8 bits. Future versions may include a timing broadcast for network synchronization. The data is sent using Amplitude Shift Keying (ASK) modulation and is recovered through the Powerharvester receiver in conjunction with external circuitry and a microcontroller. The data is factory-set and not user adjustable.

Will your transmitter interfere with other RF devices (Cell Phones, Wi-Fi routers, etc.)?
All devices that generate RF frequencies have the potential to interfere with other RF devices. The interference potential is dependent on numerous factors including the field strength of the unwanted signal, the frequency band of operation, and the ability of the receiver to reject the unwanted signal. The TX91501 Powercaster Transmitter is FCC approved as FCC ID: YESTX91501 and Industry Canada (IC) approved as IC: 8985A-TX91501. The 915MHz output power is approximately 0.5W (3W EIRP) and uses Direct Sequence Spread Spectrum (DSSS) to spread the power over more than 500kHz as required by the FCC and IC. The Powercast DSSS signal allows devices to more easily reject the Powercast signal. Powercast has done empirical testing with mobile phones, Wi-Fi devices, and 915MHz transceivers and found no degradation in device performance at practical separation distances.

How much power does your transmitter use?
The 3W version of the TX91501 transmitter draws about 1.5W of energy from a wall outlet, which is less energy than a typical night-light. It would take 40 transmitters to have the same total power as a single 60W light bulb.

Technology Questions

Is Powercast technology patented?
Yes. Powercast technology is covered by numerous patents.

Is Powercast technology safe?
Powercast technology is approved for use in the United States and Canada.  Our technology is based on radio waves that are also generated by many commonly used, devices, including mobile phones, cordless phones, wireless sensors, security systems, etc. RF energy declines as the inverse square of the distance from the transmitter, meaning it declines rapidly. A typical mobile phone user will receive far more RF energy from their own mobile phone than they will from a properly installed Powercast transmitter.

Can Powercast technology transmit power through walls or other obstructions?
Radio waves pass through many types of materials, including walls. Walls and obstructions attenuate (or absorb) radio waves, and this will reduce the amount of energy available for reception. Radio waves reflect off of metal walls which greatly reduces or prohibits power transfer.

How does Powercast technology compare to induction-based charging solutions?
Typical induction charging solutions like charging pads and electric toothbrushes require that the power source and receiving device be in very close proximity to one another to transfer power efficiently, usually within millimeters, and is essentially zero distance. These types of solutions typically require special alignment and charging cradles. Powercast’s RF-based technology provides power-over-distance to one or more devices for low-power applications and does not directly compete with induction-based charging technologies.

Powercast’s Chipset and RF Energy Harvesting Reference Design Enable Low-Cost Wireless Power over Distance

Powercast’s Chipset and RF Energy Harvesting Reference Design Enable Low-Cost Wireless Power over Distance

Pittsburgh, PA — February 22, 2012 — Powercast Corporation, a provider of innovative wireless power technology, today announced its RF-based wireless power chipset and reference design for embedded, low-power, wireless charging applications. The chipset and reference design, available for license, will make it easy and more affordable for OEMs to embed Powercast’s core RF energy-harvesting technology into their battery-less, or rechargeable battery-based devices, enabling RF energy (radio waves) to perpetually power them. Powercast’s embedded technology will convert RF energy received from either dedicated RF transmitters or ambient sources (such as mobile phones) into DC power. This wireless, embedded power supply then powers or charges its devices from within, eliminating connectors, charging contacts, and the need to replace batteries. Applications include wireless sensors for remote monitoring, portable electronic devices, and other low-power devices.

The chipset and reference design enable OEMs to directly embed the same functionality provided by the company’s P1110 or P2110 Powerharvester® receivers, but with more flexibility in terms of footprint and frequency selection, and at significantly lower cost. The energy-harvesting reference design converts RF energy to DC down to -12dBm of input power over a frequency range from 1MHz to 6GHz, and provides an output up to 5V to either trickle-charge batteries, or power battery-less devices.

The chipset consists of Powercast’s three custom chips for RF-to-DC conversion and power management. The licensable reference design contains all design files needed to embed the Powerharvester functionality and 100 sample chipsets for prototyping. Customers may use any 1MHz to 6GHz RF transmitter of sufficient power with a properly-tuned Powerharvester receiver. For example, the P2110 design coupled with a 6 dBi receiving antenna receives power from up to 40 feet (12 meters) away from Powercast’s TX91501 3-watt RF transmitter.

As a predictable energy source, RF energy can provide automated charging, power-over-distance, one-to-many charging, and controllable wireless power (continuous, scheduled or on-demand) for zero-maintenance devices while eliminating charging cords and the need to replace batteries. Because Powercast’s energy-harvesting receiver can also be powered by existing UHF RFID readers, it can be used for stand-alone wireless charging applications, recharging battery-assisted passive RFID tags, or powering passive wireless sensor tags.

In some cases there is sufficient ambient power available from mobile phones, Wi-Fi routers, and mobile networks to operate low-power devices. With advances in lower-power electronics, and the emergence of 1-V-or-less MCUs, full ambient RF harvesting from mobile networks could eventually be ubiquitous. Powercast has demonstrated its P2110 Powerharvester harvesting ambient power from a nearby mobile phone and powering a battery-less, wireless sensor, as well as recharging devices such as a wireless mouse, keyboard, and game controller.

The reference design’s bill of material (BOM) cost, including the Powercast chipset, is estimated to be less than $2 per unit in high volumes. The chipset, part number PCC210, is available through Powercast’s global network of distributors. Customers should contact Powercast directly to discuss terms of the license agreement or custom engineering services. The design of Powercast’s TX91501 transmitter is also available for license.

About Powercast
Powercast Corporation is the leading provider of RF-based wireless power technologies for low-power applications. Powercast’s products and technologies provide wireless power over distance, eliminate or reduce the need for batteries, and enable devices to be powered or charged without wires and connectors. Contact Powercast on the web (www.www.powercastco.com), via phone (1.800.963.6538) or at 566 Alpha Drive, Pittsburgh, PA 15238.

# # #

Editorial Note: A block diagram of the Powerharvester receiver is available:
https://www.powercastco.com/company/media-kit/

PR Contacts:

Harry Ostaffe
Vice President, Marketing and Business Development
Powercast Corporation
hostaffe@www.powercastco.com
+1 412-923-4774

Michelle Moody
Moody & Associates PR
michelle@moodypr.com
+1 214-363-3460

Powercast demonstrates wireless charging of credit card size smart cards

RF Energy Harvesting Credit Card

Powercast exhibited at the Sensors Expo 2011 and demonstrated using RF energy harvesting to wirelessly charge credit card size devices. The devices are representative of high function, rechargeable smart cards and contained rechargeable thin-film batteries – CYMBET EnerChip, Infinite Power Solutions THINERGY, and STMicroelectronics EnerFilm.

The video below shows the rechargeable smart card devices receiving charge from an RF transmitter. The transmitter was on the floor under the table.

For more wireless power videos visit Powercast’s channel on YouTube.

Powercast P2110 Powerharvester Receiver Named as 2011 Design News Golden Mousetrap Best Product Winner

Powercast P2110 Powerharvester Receiver Named as 2011 Design News Golden Mousetrap Best Product Winner

Pittsburgh, PA — March 29, 2011 — Powercast Corporation, a leader in RF-based wireless power and energy harvesting technology, today announced that Design News has named its P2110 Powerharvester® receiver as the 2011 Golden Mousetrap Best Product Winner in the category of wireless/mobile components.

The P2110 Powerharvester receiver converts radios waves (RF energy) into DC power for low-power, wireless applications such as remote monitoring, building automation, and real-time location systems. Embedded into electronic devices, the receiver provides wireless power to trickle charge batteries, eliminating the need to replace them, or it can power battery-free devices and eliminate batteries altogether. The receiver harvests RF energy from 850-950MHz and operates at 40-45 feet (12-14 meters) from a 3W transmitter using a reasonably-sized receiving antenna.

The P2110 can also harvest GSM signals from mobile phones in close proximity enabling a new class of battery-less devices for personal area networking. With the ability to receive power behind walls or other obstacles, the P2110 includes I/O for MCU control, data and RSSI output, and supports user-configurable, regulated output voltages up to 5.25V.

“The products highlighted in this year’s Golden Mousetrap winners and finalists clearly demonstrate both cutting-edge design ideas and the practical evolution of technologies for systems and product design engineers,” said David Greenfield, Design News Editorial Director. “Design News congratulates all the engineers and their companies who have been recognized with the Golden Mousetrap Award, and we are grateful for their contribution to this year’s competition.”

“We are honored that Design News has selected our P2110 RF energy harvesting component for this award,” said Harry Ostaffe, vice president of marketing and business development at Powercast. “This achievement recognizes our dedication to developing unique, wireless power solutions for low-power devices, enabling savings in labor costs, increased product reliability, device mobility, and user convenience.”

Broadcasted RF energy creates a predictable, controllable power source to provide power-over-distance and one-to-many charging. Unlike potentially unreliable or intermittent solar, heat or vibration micro-power energy sources, the P2110 Powerharvester receiver allows wireless devices to charge and operate completely untethered from the power source. This wireless power supply embeds within electronic devices such as wireless sensors and tracking tags, enabling them to be sealed, tamper-proof, water-proof, and more reliable. The resulting zero-maintenance devices can deploy to inaccessible or hazardous locations, and sensor networks can scale to thousands of nodes while eliminating the material and labor costs of battery replacement.

About Design News
Design News, founded in 1946, is the leading technical resource for design engineers, who create everything from planes, trains and automobiles to cellular phones, medical devices, and, just about every other product on the planet. For more information, visit: http://www.designnews.com/

About Powercast (www.www.powercastco.com)
Powercast Corporation is a leading innovator of RF energy harvesting and wireless power technology. Founded in 2003, Powercast’s proprietary core technology and related intellectual property pioneered the model for completely untethered electronic devices by transmitting and harvesting common radio waves similar to those in wireless communications. Powercast’s technologies eliminate or reduce the need for batteries, extend sensor networks into hard-to-service locations, and enable greater system efficiency in applications such as building automation and energy management.

# # #

PR Contacts:

Harry Ostaffe
Vice President, Marketing and Business Development
Powercast Corporation
hostaffe@www.powercastco.com
+1 412-923-4774

Michelle Moody
Moody & Associates PR
michelle@moodypr.com
+1 214-363-3460

Powercast Tapped for CES “Powering Up Without Wires” Panel Moderated by Today Show’s Paul Hochman

Powercast Tapped for CES “Powering Up Without Wires” Panel Moderated by Today Show’s Paul Hochman

Las Vegas, NV – Consumer Electronics Show – January 5, 2011 — Powercast Corporation, a leader in RF-based wireless power and energy harvesting technology, today announced that its vice president of marketing and business development, Harry Ostaffe, will participate in the “Powering Up Without the Wires” panel at the 2011 International Consumer Electronics Show (CES) being held January 6 – 9, 2011 in Las Vegas, NV. Moderated by the Today Show’s high-tech contributor Paul Hochman, the panel also includes Dave Baarman of Fulton Innovation, Emily Cooper of Intel and John Suh of General Motors.

WHO:
Harry Ostaffe, vice president of marketing and business development for Powercast, is a published authority on wireless power and energy-harvesting using RF energy as a remote, wire-free power source. He jointly holds a patent on network protection switching and has held many marketing management roles for broadband and wireless products.

WHAT:
TVs that extract power from thin air. Devices that harvest electricity from Wi-Fi signals so you never have to plug in again. When will these and other next-gen technologies be ready to deploy? In “Powering Up Without the Wires,” Hochman will lead a panel of wireless power experts to answer these questions.

Wireless power transmission for low-power applications is Powercast’s expertise, Powercast’s technology, which embeds in OEM devices, can harvest RF energy from ambient or dedicated sources, including mobile phones, and convert it into DC power. This power can then charge low-power consumer electronics devices such as eBook readers, as well as remote sensors for home and building automation. As a predictable energy source, RF energy (radio waves) can provide automated charging, power-over-distance, one-to-many charging, and controllable wireless power (continuous, scheduled or on-demand) for zero-maintenance devices while eliminating charging cords and battery replacement.

For more session details: http://www.cesweb.org/conferenceProgram/search/sessionDetails.asp?sessionid=3846

WHERE:
2011 International Consumer Electronics Show (CES), Las Vegas Convention Center, North Hall, Room N254

WHEN:
Thursday, January 6, 2011, 12:00 p.m. – 1:00 p.m., “Powering Up Without the Wires” session ET2

About Powercast (www.www.powercastco.com)
Powercast Corporation is a leading innovator of RF energy harvesting and wireless power technology. Founded in 2003, Powercast’s proprietary core technology and related intellectual property pioneered the model for completely untethered electronic devices by transmitting and harvesting common radio waves similar to those in wireless communications. Powercast’s technologies eliminate or reduce the need for batteries, extend sensor networks into hard-to-service locations, and enable greater system efficiency in applications such as building automation and energy management.

# # #

PR Contacts:

Harry Ostaffe
Vice President, Marketing and Business Development
Powercast Corporation
hostaffe@www.powercastco.com
+1 412-923-4774

Michelle Moody
Moody & Associates PR
michelle@moodypr.com
+1 214-363-3460

Powercast RF Transmitter Named an EDN Hot 100 Product of 2010

Powercast RF Transmitter Named an EDN Hot 100 Product of 2010

Pittsburgh, PA — January 4, 2011 — Powercast Corporation, a leader in RF-based wireless power and energy harvesting technology, today announced that EDN Magazine has named its TX91501 Powercaster™ transmitter in the EDN “Hot 100” Products of 2010. Specifically, the RF transmitter was chosen in the power category for its ability to broadcast power to remote, micro-power devices such as wireless sensors, tracking tags, and even low-power consumer electronic devices such as eBook readers. Combining Powercast’s transmitter with its P1110 or P2110 Powerharvester® receivers creates a wireless power system which broadcasts and then converts RF energy into DC power for remote powering/charging.

Compiled by EDN’s editors, this annual listing highlights the electronics industry’s most significant products, including analog and digital ICs, process technologies, power sources, processor cores, communication controllers, test instruments, embedded boards and EDA tools.

The Powercaster transmitter is approved by the FCC (Part 15) and Industry Canada. It is designed for wireless micro-power applications in the commercial, industrial, defense and consumer electronics markets including remote monitoring (temperature/environmental/security), asset tracking, building automation and automated charging.

Broadcasted RF energy creates a perpetual power source, unlike potentially unreliable solar, heat or vibration energy sources, to provide automated charging, power-over-distance, one-to-many charging, and controllable wireless power (continuous, scheduled or on-demand) for zero-maintenance devices.

About EDN’s “Hot 100” Products
Since 1999, EDN’s editors have published a list of the industry’s most significant electronic products, spanning everything from components to software tools to peripherals to test instruments. Culled from many product announcements its editors evaluate each year, the EDN “Hot 100” represents a prestigious annual snapshot of innovation in the tech industry.

About Powercast (www.www.powercastco.com)
Powercast Corporation is a leading innovator of RF energy harvesting and wireless power technology. Founded in 2003, Powercast’s proprietary core technology and related intellectual property pioneered the model for completely untethered electronic devices by transmitting and harvesting common radio waves similar to those in wireless communications. Powercast’s technologies eliminate or reduce the need for batteries, extend sensor networks into hard-to-service locations, and enable greater system efficiency in applications such as building automation and energy management.

# # #

Editorial Note: Downloadable photos are available from https://www.powercastco.com/company/media-kit/.

PR Contacts:

Harry Ostaffe
Vice President, Marketing and Business Development
Powercast Corporation
hostaffe@www.powercastco.com
+1 412-923-4774

Michelle Moody
Moody & Associates PR
michelle@moodypr.com
+1 214-363-3460